IADC635 TCI Bit With Wear Resistant Teeth For Various Formation
Our Company
Hunan TianYing Drilling Machine Manufacturing Co., Ltd. was founded in 2003, located at Zhuzhou, China, the word famous tungsten Carbide production base. We are a professional producer, and supplier of Rock Drilling Bits, all the bits crafted from the finest material available in today's market.TCI(Tungsten Carbide Insert) types are our main products, available in many sizes, designed for soft to very hard formations. With years of study and refining, our Rock Drilling Bits are preceded by extensive R&D, field tested, and backed by our unmatched commitment to service and support, our products exported to all over the world, such as Australia, North America, Middle East, North Africa and Southeast Asia etc. Today, Tianying's products have been favored and respected by domestic and foreign customers. We will continue to serve our customers with high quality products, excellent service and reasonable price.
All of our bits are manufactured according to strict standards, set forth by the American Petroleum Institute (API).
And classified according to characteristics set forth by the International Association of Drilling Contractors (IADC).
What is Rotary Cone bit?
Rotary Cone bit is an ideal solution for soft, medium, or hard rock formations, it is connected with the drill stem and rotates along with it, and drive cones to pressed on the rock. Each cone rotates round the axis of its leg and three cones simultaneously revolve around the bit center. The tungsten carbide inserts on the cone shell cause the formation to spall under the weight on bit and the impact load of cone rotating, the debris will be discharged out to hole by compression air. Tricone bits come in several different varieties, and can deal with a wide range of different rock formations. It is important to know the type of formation you are drilling in when selecting a drill bit.
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.
We took the following factors into consideration when designing:
- Journal Angle - Journal angle determines the overall aggressiveness of the bottom hole profile. Soft formation rock bits employ a 33 degree angle while hard formation rock bits employ a 36 degree angle.
- Cone Offset - Increased rate of penetration (ROP) can be achieved by offsetting the ceter line of the cone away from the center of bit rotation. This produces more on-bottom action. The higher the offset the greater the scraping and gouging action on bottom.
- Cone Angle –Oversize angle controls the diameter of the cone at gage.
Soft to medium formation tricones employ a more round cone profile and a larger cone angle. This creates a bottom hole action of gouging and scraping.
Hard formation bits employ a smaller cone angle and a flatter cone profile. This creates a bottom hole action of crushing.
- Oversize Angle - Oversize angle controls the diameter of the cone at gage.
Soft formation tricones employ a higher oversize angle; thus, escalating gage action and cone diameter.
Hard formation bits have very little or no oversize angle. This reduces the action on gage and also reaming of gage inserts.
- Intermesh - Intermesh is the distance the top of a tooth or button bit insert extends into the grooves of adjacent cones. This spacing allows for cleaning of formation and prevents packing.
- Projection and Pitch - Projection is the height of the button or tooth. Pitch is the space between teeth or inserts.
Application
Tricone drill bit is the best all-purpose drill bit and can be used for many different types of rock formations, such as Soft Rock Formations (consist mainly of sand, clay, limestone or shale), Medium Rock Formations (calcites, dolomites, hard limestones, and some hard shale), Hard and Abrasive Formation (hard shale, calcites, mudstones, chert, pyrite, granite, quartzite, and cherty lime stones).
INTERRELATIONSHIP BETWEEN INSERTS REQUIREMENTS AND THE FORMATION
| Formation Characteristics | Insert Spacing | Insert Properties | Penetration and Cuttings Production | Cleaning Flow Rate Requirement |
| Soft | Wide | Long and sharp | High | High |
| Medium | Relatively wide | Shorter and stubbier | Relatively high | Relatively high |
| Hard | Close | Short and rounded | Relatively low | Relatively lower |
Advantage:
High quality----strictly act according to the ISO9001 standard, and all bits are manufactured according to strict standards, set forth by the American Petroleum Institute (API).
Propessional Equipment---- No matter raw material selection, or processing technology are selected is the industry leading technical equipment.
16 Years History---- From 2003 to 2019, customers are located all over the world and win a good reputation.
Tianying's Best Service
1. 365×24 Year-round Service,We are committed to year-round 24-hour service even during holidays.
1. Provide professional technical services, including products introduction, selecting and problem solution etc.
3. Within 35 Working Days Quick Delivery.
Main Products We Provide
We mainly provide Tricone Bits(Rock Drilling Bits), DTH Bits and PDC Bits for mining rock drill , water well drilling and oil well drilling.
Don’t see the bit you are looking for? Give us a call, we can customize any bit to fit your unique circumstances.
1). Tricone Bits:
a). Type: Tungsten Carbide Insert (TCI)
b). Formation Application: Soft to Hard Formation
c). Size Available: 3''~26''
d). Popular IADC Code: IADC545,645,725,735,745,825,835
2). DTH Bits:
a). Type: Tungsten Carbide Insert (TCI)
b). Formation Application: Soft to Hard Formation
c). Size Available: 2.8''~26''
d). Popular IADC Code: IADC117/137, 217/237, 317/337, 417/437, 517/537, 617/637
3). PDC Bits:
a). Type: Matrix Body and Steel Body
b). Formation Application: Soft to Hard Formation
c). Size Available: 3 1/2''~26''
d). Popular IADC Code: 121/122/123, 221/223/224, 323/324/332/333/334/343,
423/424/432/433/443
Product Tags:
|
|
High Efficient TCI Tricone Bit Wear Resistant Teeth For Various Formation IADC635 Images
|
